a hippie with a minivan

Demolition Done!

We are at a pivotal point in our conversion. The demolition stage is done! Looking on Kijiji last week I found someone that does mobile AC work. I sent him an e-mail and after a few back and forths we settled on a price and took an appointment for him to come Saturday. With his help the last of the luggage racks came out, the freon from the AC (some of which went into our car because we were having AC problems there also) and then the units themselves came out. It was a lot of hard and dirty work but it needed to be done and honestly, we were very happy to have a mechanic to do it! He also loves our project and has offered to help us with some other mechanical stuff that needs to be done. In exchange we gave him the units and he will be able to sell them for pieces or in whole and we will work out other exchanges as time goes by.

We also had another friend come over on Sunday. Ludovic is a old cadet/high school friend of mine… (I have known him for 25 years! wow!). The last time I saw him he had offered to help us out. He is more into carpentry but having his help on Sunday kept us going and he was a great bit of help to finish dismantling the rest of the AC that was disconnected, getting the last of the floors out, getting the last traces of the luggage racks out and getting the drivers seat out. He also brought his beautiful dog Spot over for the day which the kids absolutely loved!

What Simon looked like after being under the bus for a while… Yesterday, Sunday was cleaning time… in the bus and in the neglected house. There were a few screws left to grind and then all the metal pieces to pick up and find a place for and then we swept the floors. May14-105 May14-89 May14-117

All that is left in the Bus now are the heaters that are still connected and the table that holds our tools for now. The rest is done. Today I vacuumed and then washed the floors and suddenly the scent in the bus changed. it doesn’t smell like a bus anymore. I can’t wait until it smells like home.

It’s yarn!

Yesterday I decided to work on making a thinner single with that amazing northern Lights wool that I have. Once I had what I thought was enough (and ran out of what I had put aside for the purpose), I then decided on making a white single to ply with it.

I am so happy with the results!

Here it is on the bobbin. At this point it was a little more than half full.

Here it is off the bobbin and onto the Niddy Noddy. If you don’t know what a niddy noddy is, it is a device used to make skeins and measure length…

So there it was… 88 yards (80 metres) of worsted weight yarn…. My first real usable yarn on my third day of spinning!

Isn’t it pretty?

This yarn and experience made me realize that this is not the wheel for me. Don’t get me wrong, it is a great wheel and easy to spin on, and has a lot of potential. but I can already feel its limitations down the road.

I had jumped on the chance to get it because it was not too expensive compared to the wheel that I really want, especially because I was having hesitations with a more expensive purchase not knowing if I would like spinning. But now that I know and I know what the other wheel could offer, I have decided to buy the other wheel and sell this one!

So I have a new wheel on the way! yay!

Anyone local (Near Montreal) want to buy a Like new Ashford Kiwi 2 for 300$?

Intro to the Bus!

Another forgotten post here… but it is never too late. I took this in the fall a couple of weeks before we stopped working on the bus…

New Blog Look!

As you may see there are some changes on my blog. Some are visual changes…. actually there are many are visual changes, but the biggest change is in the back-end.

Three installations of WordPress have now become one. Main page, Blog and Bus. All without changing each address.

It will be easier to keep up, more inviting for me to write, and it will hopefully be more user-friendly to explore and see everything that I have to offer.
I have to say, I am loving the look of it.

One of the main reasons that I had originally set things up the way I had been logistics since my blog has always been at /blog which in turn would have severed many of my links or made things harder to change if I would have changed the folder or address. There are still some kinks to work out with a few broken links and images but everything is slowly being taken care of when I find the issues. I have updated my feed also and hopefully everything is working on that end also.

The other issue was that I wanted to keep myself open to the potential of advertising on my bus page if I wanted to go that way without ever have ads on my Blog. It has always been important for me to have an ad free blog but I think that I will be able to work things out so that any advertizing would only be on the bus pages leaving the rest ad free. I can always work something out later if it came to that, but I love being able to post on my blog and my bus page at the same time, but have only the bus posts on the bus page.

I would love to have your opinion of the look and how things work, and if you find any little problems please tell me!!

Luggage racks coming out!

I am very late in writing this post!

Before the cold got the best of us and snow covered the bus, we did some work getting the luggage racks/air conditioning vents out.

This is what we were working with. The luggage racks/vents on each side the whole length of the bus with the air conditioning units in the middle that blow the air into the vents.

Every time I went into the bus I would stare at them wondering how they would come out. Many people said I should just grind the brackets and just cut them out but it was more complicated and more simple than that at the same time. See down the middle there? On top of the rack. There are air conditioning units that use the racks as a vent. So cutting it all out wouldn’t work well at that section and it would ruin the brackets which would be great to be able to re-use.

So I looked at it another way. How did they get them in?

I pulled out the bumper strip that went along on the top and then started to see how it was all connected.

Rivets #1 were holding the shelf and the plastic together to the bracket. So those needed to be the first to go.

These are Rivets #1…

Once those rivets were out I took out the rivets that were holding the plastic at the joints. They could just be pulled out and snipped as needed and then I was able to start pulling and breaking the plastic vent cover. This stuff is sturdy plastic and it tore on a line but could easily span back and when it did it hurt. I had many scratches at the end from it.

On this picture, you can see how I have ripped the plastic into strips. I took all of the vent covers off and popped the lights out of their sockets. They were all broken so I didn’t pay attention to trying to keep anything intact with the wires or lighting.
All of the front rivets are out and the whole shelf is being held by the back rivets and the rivets that hold the sections together.

After that I did the back rivets (Rivets #2). I started with the ones that were closest to where the shelves meet and not the ones at the end. If I were to work backwards, all of the weight would be disproportionate and it would make it harder. Once you get to the the rivets near the end. You need to either have someone close to hold the shelf and guide it down. (or make sure that the path is clear and do it yourself and be prepared to frighten everyone with the loud bang that makes people run out of the house to make sure you are still alive)

Oh yes… Can you see that piece of carpet dangling on the other shelf in this next picture?
That is at the joint and you will need to pull and chisel it away to get to the rivets where the shelves meet. Then, with the shelf down, the middle of those rivets with be exposed and with the weight that is being put on them with the other shelf hanging, they will be easy to break by using a hammer and chisel.

Next you can take out the brackets by drilling into the rivets (#3 and #4 in the picture above).

Make sure you are using a drill bit that is larger than the hole. That way you take the head off and the rivet is free. Xavier loved that he was able to do all them on his own. The only thing is that he quickly learned that even if it is hot, you need a long sleeve shirt to protect you from tiny pieces of burning metal.

This is basically the point where we stopped last year…

The only thing left up are the sections that house the air conditioners and that are not being held by brackets but by the air conditioner units themselves and we needed to find someone to empty the freon from them in order to continue. I finally found someone to do it after calling everywhere but now we just need to wait until there is a bit less snow.

Why don’t we keep them? One reason is that only one side was working. The second reason, is that they blow into the vents which we took off. They also take up a lot of space and can only be used when the bus is running. So there are no real positives in keeping them in there.

So next step: